28
Special System Features
a new message is received and the message center is full,
the oldest message is deleted, the rest of the messages are
shifted down one location, and the new message is stored
in location #1.
Recalling/Viewing Calling Line ID Messages
1. Press
and release, then press
again and hold
until one of the folowing messages appears in the
display:
HH nEQW
(
HH
is the number of new messages)
OO nEQW
(when there are no new messages)
no M<ESgS
(when there are no old or new messages)
2. Scroll through the messages in the message center by
pressing
to move forward and
to move
backward.
3. Press
to exit the message center.
As you scroll through the messages, each Calling Line ID
message will be labeled with either
HH nEQW
(new
message) or
HH Cid
(old message), where
HH
is the
message center location number. As you view each
message, the display will cycle through the Calling Line ID
information (as shown in the following example) until you
scroll to the next message or place a call to the displayed
number.
Example
18475551212
Placing a Call to a Calling Line ID Number
After recalling the desired Calling Line ID number (the
number appearing in the display), press
to place a
call to this number.
RCL
RCL
END
SND
MicroTAC_Book Page 28 Thursday, October 16, 1997 1:30 PM
Black spot 45.0
°
169.71 LPI
