Placing Calls From Memory
15
About Recalling from Memory
Phone numbers stored in memory can be recalled in any
of three ways:
• By entering a two-digit location number
• By scrolling using the Memory Location Numbers
• By pressing any of the One Touch Dialing Keys
(described in “One Touch Dialing Keys” on
page 17)
Using any of these methods, once a phone number is
displayed, you may place a call to that number by pressing
.
NOTE
You may also scroll through the memory locations
while in a call (for instance, if you want to look up a phone
number to pass along to the other party). When finished,
press
. This will cancel scrolling, but will not end your
current call.
Placing Calls by Entering Two-Digit
Number
1. Press .
2. Enter the desired two-digit location number. The
display shows the location number, then the last 10
digits of the stored phone number. Press
again to
view the complete number.
3. Press
to place a call to the number stored at the
two-digit memory location.
SND
END
RCL
RCL
SND
MicroTAC_Book Page 15 Thursday, October 16, 1997 1:30 PM
Black spot 45.0
°
169.71 LPI
