Motorola MicroTAC Owner'S Manual Download Page 28

Page: 28 / 81

Storing Numbers in Memory

Deleting a Memory Entry

1. Press and hold

, then press

, and enter the

two-digit location number you wish to delete.

2. The phone will display

FULL

, flash the number in

memory, followed by

ChAngE?

3. Press

to delete, or press

to exit without

deleting the entry.

Changing a Memory Entry

1. Press

and the two-digit location number so that

the number to be changed is displayed.

2. Repeatedly press

to “back out” each of the digits

displayed (all the digits, or just the ones you wish to
change).

3. Enter the new digits.
4. Press

and the same two-digit location number.

5. The location number and

FULL

will display. The

display will then alternate between the currently
stored number and

ChAngE?

6. Press

to save the newly entered number in this

memory location, overwriting the currently stored
number.

CLR

STO

END

RCL

CLR

STO

MicroTAC_Book Page 14 Thursday, October 16, 1997 1:30 PM

Black spot 45.0

169.71 LPI

Summary of Contents for MicroTAC


















































































Search results

Summary of Contents for MicroTAC

Reviews:

Related manuals for MicroTAC

Brands by name

Popular brands

Motorola MicroTAC, Owner'S Manual

Search results

Summary of Contents for MicroTAC

Reviews:

Related manuals for MicroTAC

Brands by name

Popular brands