Motorola MC9090G - RFID - Win Mobile 5.0 624 MHz, User Manual

Page: 99 / 252

Operating the MC909X 2 - 55
To perform a cold boot:
1.
Press the primary battery release on the mobile computer to partially eject the battery from the mobile
computer.
2.
On an MC9090-G, while the battery is partially released, simultaneously press and release the trigger and
the
Power button.
3.
On an MC-909X-K or MC909X-S, while the battery is partially released, simultaneously press and release
the left scan button and the
Power button.
4.
Push the battery to fully re-insert it in the mobile computer. One audible click can be heard as the battery is
fully inserted.
5.
The mobile computer initializes.
Waking the Mobile Computer
The wakeup conditions define what actions wakeup the mobile computer. These settings are configurable and
the factory default settings shown in
Table 2-16 are subject to change/update.
Table 2-16
Wakeup Conditions (Default Settings)
Status Description Conditions for Wakeup
Power Off When the mobile computer is set to the suspend
mode by pressing
Power , these actions wake the
mobile computer.
1. Power button is pressed.
2. AC power added or removed.
3. Cradle/cable connect or disconnect.
Key or scan button is pressed.
Real Time Clock set to wake up.
Incoming phone call (MC9094 and
MC9097 only)
Auto Off When the mobile computer goes into suspend
mode by an automatic power-off function, these
actions wake the mobile computer. 1. Power button is pressed.
2. AC power added or removed.
3. Cradle/cable connect or disconnect.
Key or scan button is pressed.
Real Time Clock set to wake up.
Incoming phone call (MC9094 and
MC9097 only).