manualshive.com logo in svg

Motorola MC145220EVK, Manual, Page: 40 / 56

Share
Download
Motorola MC145220EVK Manual Download Page 40

MC145220EVK

MOTOROLA

40

[N] Change C Register and Prescale

To access this command in the program, select a board in the “Define boards to program” screen and
then press [Q]! . This will place you in the “Select from the available options” screen. The command [N]
is on this screen.

See page 26 of this document for a sample screen shot of this command.

This command displays a submenu with the next seven options displayed. This is where the user can
modify the C register settings.

[0] Change output A – (Port)

To access this command in the program, select a board in the “Define boards to program” screen
and then press [Q]! . This will place you in the “Select from the available options” screen. Press [N],
which will place you in the “Change C Register” screen. The command [0] is on this screen.

This is only available with Output A configured as a port for the currently targeted board. See [A][0]!
command. Command not available in dual mode.

[0]! Reset output A to 0

This resets the PORT field of register C (C

1

) to 0 and then writes register C to the currently

targeted board.

[1]! Set output A to 1

This sets the PORT field of register C (C

1

) to 1 and then writes register C to the currently

targeted board.

[1] Change output B (Out B) (not available on ’220)

To access this command in the program, select a board in the “Define boards to program” screen
and then press [Q]! . This will place you in the “Select from the available options” screen. Press [N],
which will place you in the “Change C Register” screen. The command [1] is on this screen.

Selects the logic state of output B.

[0]! Reset output B to 0

This resets the OUTB bit of register C (C0) to 0 and then writes register C to the currently
targeted board.

[1]! Set output B to 1

This sets the OUTB bit of register C (C0) to 1 and then writes register C to the currently tar-
geted board.

 

   

  

F

re

e

sc

a

le

 S

e

m

ic

o

n

d

u

c

to

r,

 I

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

 

Freescale Semiconductor, Inc.

For More Information On This Product,

   Go to: www.freescale.com

n

c

.

..

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005

Summary of Contents for MC145220EVK

























































Reviews:

No comments