manualshive.com logo in svg

Motorola MC145220EVK, Manual, Page: 32 / 56

Share
Download
Motorola MC145220EVK Manual Download Page 32

MC145220EVK

MOTOROLA

32

Set Crystal or Reference Mode

This is the resulting screen that is displayed after the user selects the ‘[R] Set crystal/reference mode’
command. The user is provided a submenu to select from. This submenu contains commands to change
the crystal/reference mode.

The current reference mode is displayed as ‘Crystal mode, Shutdown’; ‘Crystal mode, Active’; ‘Refer-
ence mode, REFin enabled, REFout low’; ‘Reference mode, REFout = REFin’; ‘Reference mode, REFout =
REFin/2’; ‘Reference mode, REFout = REFin/4’; ‘Reference mode, REFout = REFin/8’; or ‘Reference
mode, REFout = REFin/16’, depending on the current setting.

The user can select the [0] to [7] menu options to change the crystal/reference mode setting.

If the [Q] command is selected, then the user is returned to the main menu.

Welcome to MC145xxx EVK Demonstration Program, rev 4.0

Set crystal or reference mode

Available Boards – Current target board is: A, MC145220 Dual
 Brd [A]!: MC145220 Dual    Brd [–]!: N/A             Brd [–]!: N/A
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Set crystal or reference mode – Currently: Ref. mode, REFout low
 [0]! Crystal mode, Shutdown
 [1]! Crystal mode, Active
 [2]! Reference mode, REFin enabled, REFout low
 [3]! Reference mode, REFout = REFin
 [4]! Reference mode, REFout = REFin/2
 [5]! Reference mode, REFout = REFin/4
 [6]! Reference mode, REFout = REFin/8
 [7]! Reference mode, REFout = REFin/16

 [Q] to return to main menu

[X]! Terminate demonstration program. [?]! View help screen.

This screen shot is a representative sample of the screens within this program. To access this screen
with the MC145220 Dual EVK selected in the “Define boards to program” screen, from within the “Define
boards to program” screen, press [Q]! . This will place you in the “Select from the available options”
screen. Select [R], which will place you in the “Set crystal or reference mode” screen you see above.

This sequence to access the “Set crystal or reference mode” screen works the same for any selected
board in the “Define boards to program” screen.

 

   

  

F

re

e

sc

a

le

 S

e

m

ic

o

n

d

u

c

to

r,

 I

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

 

Freescale Semiconductor, Inc.

For More Information On This Product,

   Go to: www.freescale.com

n

c

.

..

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005

Summary of Contents for MC145220EVK

























































Reviews:

No comments