manualshive.com logo in svg

Motorola MC145220EVK, Manual, Page: 27 / 56

Share
Download
Motorola MC145220EVK Manual Download Page 27

MC145220EVK

27

MOTOROLA

Change C Register, PDout Current

This is the resulting screen that is displayed after the user selects the ‘[N] Change C Register and Pres-
cale’ and then the ‘[2] Change PDout Current’ command. The user is provided a submenu to select from.
This submenu contains commands to change the PDout current settings.

The screen is slightly different depending on whether Output A is defined as a port or not. See command
[E] from the main menu. Note in ’220 dual mode, PDout current for PLL and PLL

′

 is modified simulta-

neously by the software program.

The current PDout setting is displayed as ‘5%’, ‘50%’, ‘80%’, or ‘100%’.

The user can select the [0], [1], [2], and [3] menu options to change the percent of PDout current.

If the [Q] command is selected, then the user is returned to the main menu.

Welcome to MC145xxx EVK Demonstration Program, rev 4.0

Change C Register, PDout Current

Available Boards – Current target board is: A, MC145220 Dual
 Brd [A]!: MC145220 Dual     Brd [–]!: N/A             Brd [–]!: N/A
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Evaluation program modifies PDout Current on both PLL’s for this board.

Change C Register, PDout Current – Currently: 100%
 [0]! 5%
 [1]! 50%
 [2]! 80%
 [3]! 100%

 [Q] to return to previous menu

[X]! Terminate demonstration program. [?]! View help screen.

This screen shot is a representative sample of the screens within this program. To access this screen
with the MC145220 Dual EVK selected in the “Define boards to program” screen, press [Q]! . This will
place you in the “Select from the available options” screen. In this screen, press [N]. This will place you
in the “Change C Register and Prescale” screen. To access the screen above, press [2].

 

   

  

F

re

e

sc

a

le

 S

e

m

ic

o

n

d

u

c

to

r,

 I

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

 

Freescale Semiconductor, Inc.

For More Information On This Product,

   Go to: www.freescale.com

n

c

.

..

ARCHIVED BY FREESCALE SEMICONDUCTOR, INC. 2005

Summary of Contents for MC145220EVK

























































Reviews:

No comments