33
Contacts
4
To assign a Contacts type to the number or address
being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
Note:
For information about creating SDG lists, see
“Creating SDG Lists in Contacts” on page 52.
5
To store a number or address:
Select the
#
field (or
ID
for an email address, or
IP
for an
IP address).
Enter the number or address. For phone numbers, use
the 10-digit format. For email addresses, see “Entering
Text” on page 60.
Tip:
Press
A
under
Browse
to select a number or
address from Contacts, the recent calls list, or
Memo.
When you are finished, press
o
.
6
If you want to change the default Speed Dial number
or a create a voice name for the entry, select
[Options]
.
See “Assigning a Speed Dial Number or Voice Name” on
page 34.
7
If you want to add more numbers or addresses to the
entry:
Scroll past the information you already entered.
Enter the additional information for the entry using
step 3 through step 6. You must assign a name to the
entry, if you have not already.
8
Press
A
under
Save.
Assigning a Ring Tone or Picture
1
If you have not already, select
[Ring Tone/Picture]
.
2
If you want to assign a ring tone from the list of ring
tones:
With
Ringer
highlighted, scroll left or right to choose a
ring tone.
-or-
Select
Ringer
. Select the ring tone you want to assign.
3
If you want to assign a picture from the media center:
Scroll to
Picture
. Scroll left or right to choose a picture.
-or-
Select
Picture
. Select the picture you want to assign.
Only pictures that can be assigned to Contacts entries are
displayed. Some large pictures cannot be assigned.
