2 and 4 Channel Models
1. Turn Channel Selector knob to channel 1.
Fig. I
2. Hold Push-To-Talk button down while
turning radio on.
Fig. J
Radio announces current frequency set-
ting for that channel. Example: “fre-
quency one”
3. Press Push-To-Talk button to scroll
through frequencies.
Radio announces each frequency as you
scroll. Example: “two...three...”
4. Release Push-To-Talk when you have
reached desired frequency.
5. Turn Channel Selector knob to channel 2
and repeat steps 3 and 4 above.
4 Channel Models: Repeat to set chan-
nels 3 and 4.
6. Press Monitor button to select and save
new frequency setting. Fig. L
Radio announces current code setting.
Example: “code two nine”
7. Press Push-To-Talk button to scroll
through codes.
Radio announces each code as you
scroll. Example: “three zero...three
one”
8. Release Push-To-Talk when you have
reached desired code.
9. Press Monitor button to select and save
new code setting.
Radio “beeps” to indicate it has exited
programming and is ready for use.
Notes:
• To use this radio with other Spirit models,
please see tables on pages 10-11.
• Code numbers with two digits (10-38) will
be announced “one zero...three eight”.
• You can only scroll forward when select-
ing frequency or code.
• When you are changing frequency or
code, you can not send messages.
• The Code setting applies to all channels.
You can not select a different code for
each channel.
• For Radios With Scan: The radio will
sound a warning tone if you accidentally
switch to the “s” position while program-
ming. See page 12 for more information.
9
FIG. K
FIG. L
Push-To-Talk
Monitor
FIG. I
2 or 4 Channel Model
Channel Selector Knob
