Out Of Range Indication
Whenever you are too far away from your paging system`s
transmitter to reliably receive messages, your pager displays the
Out Of Range symbol
1
and a Out Of Range alert is started. If
you do not recognize the alert (you do not press any button) there
will be a repetition in regular intervals and the Out Of Range
symbol
1
flashes.
Setting The Clock
Whenever you turn your pager on it shows you time and date.
Setting The Clock is done this way:
1.
Press the Function Button
#
to display the function menu.
2.
Move the cursor until the Set Time symbol
W
flashes
using the
!
and
"
buttons.
3.
Press the Function Button
#
to display the Set Time
screen.
4.
Now set the time exactely. The active position flashes.
Change the value of the active position using the
!
button (LX2) or
ý
and
þ
button (LX4). Press
"
(LX2)
or
!
and
"
(LX4) to move over to the next position. To
escape from any field without making changes press
(
.
5.
Press the Function Button
#
to iniate your changes.
Hint: The clock can also be set „over the air“ by the paging
system`s transmitter (remote maintenance)
Setting The Alert Pattern
You can choose the one (out of 16) alert pattern that you like
most and that shall be audible when a message is received.
1.
Press the Function Button
#
to display the function menu.
2.
Press
!
or
"
until the Set Alert
C
symbol flashes.
3.
Press
#
to display the Set Alert screen.
4.
Using the buttons
!
and
"
choose the alert pattern you
like most. The number of the chosen pattern flashes
(„1..16“ selectable pattern, „
C
“ pattern fixed by pro-
gramming), the selected alert plays through the internal
speaker. To escape without making changes, press
(
.
5.
Confirm your selection by pressing the
#
button. The
selected alert plays through the internal speaker.
Summary of Contents for LX2
Page 23: ...B227 02 04 ...