Motorola LX2, User Manual

Page: 16 / 23

Setting The Alert Mode
You can choose one out of four different Alert Modes:
D
audible plus vibration
D
audible (without vibration)
D
gentle (low sound level)
G
silent (vibration only)
1. Press
#
to display the function menu.
2. Move the cursor (
!
and
"
buttons) until the speaker
symbol
D
flashes.
3. Press
#
again to display the Set Alert Mode screen.
4. Now select the wanted Alert Mode (
!
and
"
buttons)
The symbol for audible
D
or silent
G
Alert Mode flashes,
your pager emits a short alert according to the chosen
alert mode. To escape without making changes, press
(
.
5. Confirm your selection by pressing the
#
button. Your
pager emits a short alert according to the chosen Alert
Mode.
Receiving And Reading Messages
As soon as your pager receives a message, it alerts and the Mes-
sage In Memory indicator is displayed. It indicates an incoming
message.
1.
Press any button to stop the alert.
2. If you do not recognize the alert (you do not press any
button) there will be a repetition in regular intervals.
3. To read the message press the Read Button
(
.
4. The flashing arrow
R
at the bottom corner of the screen
indicates that the received message continues beyond the
first lines of the display. To be able to continue reading,
press the Read Button
(
again. Each
(
press advances
the message to the next lines. Press and hold
(
to rap-
idly scroll through your message.
LX4 only: Press
ý
or
þ
to scroll up or down your mes-
sage.
5. If more than one message exists, press
!
or
"
to select
the message you want to read. The reversed arrow cursor
L
indicates the location of your message in memory.
6. The Message In Memory Indicator of a message, that has
not yet been read, flashes until the message is read one
time.
7. A flashing On
&
symbol indicates a message has been
received, but has not yet been read.
Hint: Any character of the message that was received incorrectely
is alternately displayed as flashing and as the error character
»
.