LX2
plus / advanced and LX4 plus / advanced
B2270901
Content is subject to change without notice!
22
4.2.4
Removing/ Replacing The Decoder Board
•
Remove the battery.
•
Remove the battery door and the housing latch. Take off the back housing.
•
Remove the receiver board (refer to Fig. 7).
•
Remove the shock pad.
•
In order to remove the decoder board from the front housing slightly push the LCD
diffusor near to the battery compartment (refer to Fig. 9).
•
Insert the decoder board with the guiding tabs in front into the front housing (refer to
Fig. 9) and press down gently.
•
Replace the shock pad aligning it correctly. Pay attention to the marked areas 1-3/ Fig.
11
•
Replace the receiver board (refer to Fig.7).
•
Replace the housing latch, back housing, battery door and battery.
Fig. 11
1
2
3
