Motorola L702CBT, User Manual

Page: 53 / 71

USING THE PHONE 53
4. When the other cordless handset answers by
pressing
/HOME or /SPEAKER , or the
corded base answers by lifting up the corded
handset or pressing
/HOME , press /HOME
on the calling cordless handset to transfer the call.
If the other cordless handset or corded base does
not answer, press
/MUTE on the calling
cordless handset to talk to your caller again.
6.20.3 Three-party conference call
1. During an external home call, press MENU . Your
call will be put on hold.
2. Press VOL+ or REDIAL/VOL- to select the cordless
handset or corded base you want to call.
3. Press MENU to make the call.
4. When the other cordless handset or the corded base
answers the intercom call, press
MENU on the calling
cordless handset to set up the conference call.
5. Press /HOME on any cordless handset to end a
three-party conference call and leave the other
cordless handset or corded base engaged with the
caller.
NOTE
During an external home call, pressing /HOME or
/SPEAKER on any cordless handset, or lifting the
corded handset or pressing /HOME on the base will
join in the call and set up a conference call.
6.21 Setting the dial mode
The default dialing mode is suitable for your country and
network operator. It is unlikely that you should need to
change this setting unless advised to do so.
1. Press MENU and then VOL+ or REDIAL/VOL- to
select
SETUP BS
.
2. Press MENU to select
DIAL MODE
.
3. Press MENU and then VOL+ or REDIAL/VOL- to
select
TONE
or
PULSE
.
4. Press MENU to save the setting.
NOTE
If pulse mode is selected, press */TONE to switch from
pulse to tone dialing temporarily when dialing out. After
the call is ended, the dial mode will change back to
pulse automatically.