GETTING STARTED
7
1. GETTING STARTED
WARNING
•
Do not place your phone in the bathroom or other
humid areas.
Location
When choosing a location for your new phone, here are
some important guidelines you should consider:
•
Avoid sources of noise and heat, such as motors,
fluorescent lighting, microwave ovens, heating
appliances and direct sunlight.
•
Avoid areas of excessive dust, moisture, and low
temperature.
•
Avoid other cordless telephones or personal
computers.
•
Never install telephone wiring during a lightning storm.
•
Never install telephone jacks in wet locations
unless the jack is specifically designed for wet
locations.
•
Never touch non-insulated telephone wires or
terminals unless the telephone line has been
disconnected at the network interface.
•
Use caution when installing or modifying telephone
lines.
HANDSET RANGE
Optimal range is reached when there are no other
electrical appliances working within the range area. Any
obstruction between the corded base and cordless
handset will also reduce the range significantly.
SIGNAL STRENGTH
When out of range of the corded base, the screen
shows
OUT OF RANGE
. If you are on a call, the line will
hang up. Move back within range of the corded base.
The cordless handset will automatically re-connect to
the corded base.
Setting up
IMPORTANT
The corded base must be plugged into an electrical
outlet at all times. Do not connect the telephone line
cord into the telephone wall jack until the cordless
handset is fully charged. Use only the adapter and
telephone line cord supplied with the product.
WHICH POWER ADAPTER
The power adapter with the crystal DC plug is for the
corded base unit and the power adapter with the small
round DC plug is for the cordless charger unit.
Summary of Contents for L702CBT
Page 1: ......
Page 70: ...Technical Specifications RF frequency band 1921 536 MHz 1928 448 MHz ...
Page 71: ......