6809504A60-A
March 09, 2007
25
Level 1 and 2 Service Manual
Disassembly
6.
Use the plastic tweezers to lift the acoustic gasket from the transceiver PC
board assembly (see Figure 13).
7.
To replace, place the transceiver board assembly into the rear housing.
8.
Use the plastic tweezers to place the acoustic gasket onto the transceiver PCB
assembly.
9.
Carefully and gently press the transceiver board into position and until it snaps
into place.
10. Reconnect the MMC board connector to the transceiver PC board assembly.
Expose the adhesive on the MMC card surface for adhesion to the rear housing
assembly.
11. Attach the EMU grommet to the transceiver PC board assembly.
12. Replace the side key, volume keys, and smart key. Ensure the keys move freely
and make proper contact with the transceiver board.
13. Replace the rear housing, battery, and battery cover as described in the
procedures.
061129o
Figure 13. Removing the Acoustic Gasket
Tr
a
n
s
ceiver PCB A
ss
em
b
ly
Aco
us
tic g
as
ket
Pl
as
tic tweezer
s
Summary of Contents for KRZR K1M SPRINT
Page 4: ...4 March 09 2007 6809504A60 A Contents K1m ...
Page 59: ......
