29
Operational Cautions
Note:
The areas with potentially explosive atmospheres referred to
above include fueling areas such as below decks on boats,
fuel or chemical transfer or storage facilities, areas where the
air contains chemicals or particles, such as grain, dust or
metal powders, and any other area where you would
normally be advised to turn off your vehicle engine. Areas
with potentially explosive atmospheres are often but not
always posted.
Blasting Caps and Areas
To avoid possible interference with blasting operations, turn off your
modem product when you are near electrical blasting caps, or in a
blasting area. Obey all signs and instructions.
Operational Cautions
Cleaning and Drying Considerations
This product is not water proof, and exposing the unit to liquids may
result in permanent damage to the unit.
If your modem product interior gets wet, then do not try to accelerate
drying with the use of an oven or a dryer as this will damage the modem
product and void the warranty. Instead, do the following:
1
Immediately power off the modem product.
2
Remove SIM card (if so equipped) from modem product.
3
Shake excess liquid from modem product.
4
Place the modem product in an area that is at room temperature
and has good air flow.
5
Let the modem product and SIM card dry for 72 hours before
powering on the modem product.
If the modem product does not work after following the steps listed
above, contact your dealer for servicing information.
Clean the external surfaces of the modem product with a damp cloth,
using a mild solution of dishwashing detergent and water. Some
household cleaners may contain chemicals that could seriously
damage the modem product. Avoid the use of any petroleum-based
solvent cleaners. Also, avoid applying liquids directly on the modem
product.
!
Summary of Contents for im240 - Wireless PC Card Modem
Page 2: ......
Page 5: ...iii MOTOROLA LIMITED WARRANTY 30 Patent and Trademark Information 33 Index 34 ...
Page 8: ...vi ...
