12
Using the Modem
Note:
If you are installing using ActiveSync, the host PC must have:
•
A CD-ROM drive
•
ActiveSync version 3.1 or higher
Microsoft ActiveSync must indicate that the connection has been
established.
2
Insert the im240 Wireless Modem Installation and Application
Software CD-ROM in your CD-ROM or DVD drive.
3
If the im240 Wireless Modem and Installation and Application
Software installation program does not start automatically, select
Start, Run, and then type
d:\setup.exe
, where
d
refers to the letter
of your CD-ROM or DVD drive.
4
Use the
Next
and
Back
buttons to navigate through the Wizard.
Using the default settings for the Destination Location and Program
Folder is recommended unless you have special requirements and
an advanced understanding of PC configuration.
5
When prompted, select
Pocket PC
. Click Next.
6
When prompted, insert your im240 Wireless Modem into the
available PCMCIA Type II slot.
Note:
Some Pocket PC’s may not be compatible with a PCMCIA
Type II adapter. Check with your Pocket PC manufacturer.
7
To start the im240 Wireless Modem Dashboard Application, click
the im240 Wireless Modem icon on your programs desktop.
Using the Modem
Before using the im240 Wireless Modem, you must insert it into your
laptop’s PCMCIA slot or connect it to your Pocket PC’s PCMCIA slot, if
available. Then connect the detachable antenna or external antenna.
You must register the im240 Wireless Modem with your service
providers’ network before you use it. Your im240 Wireless Modem
registers automatically when turned on.
Note:
The initial registration may take an extended amount of time
to complete. The im240 Wireless Modem will need to retrieve
configuration data from the system.
The Dashboard displays the status of the modem, Powering On,
Seeking Signal, Registering, and Dialing to Network
Summary of Contents for im240 - Wireless PC Card Modem
Page 2: ......
Page 5: ...iii MOTOROLA LIMITED WARRANTY 30 Patent and Trademark Information 33 Index 34 ...
Page 8: ...vi ...
