Motorola i30sx User Manual Download Page 83

Page: 83 / 150

Messages

The main topics covered in this section are listed below:

Message Center

The Message Center enables you to access all messaging services through one
screen.

To access the Message Center:

If MESG is one of your display options:

If MESG is not one of your display options:

The Message Center screen displays the number of messages you have in each
message service — Voice Mail, Text Msgs (Text and Numeric Messages), and
Net Alert (Net Mail).

Message Center

Page 81

Voice Mail

Page 82

Text and Numeric Messaging

Page 84

Net Alert

Page 86

Using Your Phone as a Modem

Page 87

From the Ready screen, press

under MESG.

From the Ready screen, press

Press

to scroll to Messages.

Press

under SELECT.

Summary of Contents for i30sx























































































































































Search results

Summary of Contents for i30sx

Reviews:

Related manuals for i30sx

Brands by name

Popular brands

Motorola i30sx, User Manual

Search results

Summary of Contents for i30sx

Reviews:

Related manuals for i30sx

Brands by name

Popular brands