12
Turning OFF Your RSM
You can turn off your RSM to save battery power
without losing memory with the connection to the
radio. The next time the RSM is turned on, the
connection re-establishes at a faster rate than
compared with the intial connection.
1.
Press both the RSM BLUE and PTT buttons
for more than 3 seconds until an audio alert
tone sounds.
• The RSM LED flashes RED for one second.
• The RSM powers down.
OTE:
The RSM turns off within 3 minutes if no
connection is re-established and no but-
tons are pressed.
Disconnecting the Bluetooth Wireless Connection
You can disconnect and re-establish the connec-
tion when both the RSM and radio are still on.
1.
Press both the RSM BLUE and PTT buttons
for less than 3 seconds.
• The RSM LED flashes RED, indicating the
connection is broken.
• An audio alert tone sounds.
2.
To re-establish the connection while both the
RSM and radio are still on, place the RSM
within a few inches of the radio. Press both
the radio adapter’s BLUE and PTT buttons,
then immediately press both the RSM’s
BLUE and PTT buttons.
N
