8
GETTING STARTED
Installing Your Batteries
Included with your RSM are three (3) AA alkaline
batteries. These must be installed for the RSM to
work. To do this, follow these steps:
1.
Remove the battery cover by inserting a coin or
other thin object into the screw slot (See
Figure 2). Turn the screw counter-clockwise.
2.
Install three (3) AA batteries in the correct
position.
3.
Place the battery cover back onto the RSM
and turn the battery cover screw clockwise
until it is tight.
OTE:
Be careful to place the AA batteries in
their correct polarity indicated positions
(+ positive, – negative).
N
Belt Clip
For attaching RSM
Battery Cover Screw
Used to open compartment and replace batteries
Figure 2.
Battery
Cover
