Motorola hellosecurity User Manual Download

Page: 57 / 63

Network Camera User Manual

Icon

Description

Icon

Description

Play button. After pausing
the video, click this button
to continue playing.

Pause button

Stop button

Speed down

Speed up

Watermark display

Enable / disable audio; drag the slider to adjust the volume after
enabling audio.

5.2.2

SD Card Video Search

Click Search to go to the interface as shown below. Videos that were recorded on the SD card
can be played in this interface.

Choose “Record”—“SD Card”.

Set search time: Select the date and choose the start and end time.

Click

to search the images.

Select the alarm events at the bottom of the interface.

Select mix stream (video and audio stream) or video stream as needed.

Double click on a file name in the list to start playback.

Summary of Contents for hellosecurity
































































Search results

Summary of Contents for hellosecurity

Reviews:

Related manuals for hellosecurity

Brands by name

Popular brands

Motorola hellosecurity, User Manual

Search results

Summary of Contents for hellosecurity

Reviews:

Related manuals for hellosecurity

Brands by name

Popular brands