45
Network Camera User Manual
4.7.2
Online User
Go to Config
Security
Online User to view the user who is viewing the live video.
An administrator user can kick out all the other users (including other administrators).
4.7.3
Block and Allow Lists
Go to Config
Security
Block and Allow Lists as shown below.
The setup steps are as follows:
Check the “Enable address filtering” check box.
Select “Block/Allow the following address”, IPv4/IPv6/MAC and then enter IP address or
MAC address in the address box and click the “Add” button.
4.7.4
Security Management
Go to Config
Security
Security Management as shown below.
In order to prevent against malicious password unlocking, “locking once illegal login”
function can be enabled here. If this function is enabled, login failure after trying six times
will make the login interface locked. The camera can be logged in again after a half hour or
after the camera reboots.
For some specified versions, anonymous login with a private protocol can be enabled here. If
this function is enabled, enter http://host:port/Anonymous/1[2/3] (eg.
http://192.168.226.201:80/Anonymous/1) via web browser to access the camera. 1 indicates
main stream; 2 indicates sub stream; 3 indicates third stream. Only video can be viewed by
this means and no other operations can be done. If no such function, please skip the
instruction.
