manualshive.com logo in svg

Motorola HELLOMOTO SLVR L7, Service Manual, Page: 35 / 52

Share
Download
Motorola HELLOMOTO SLVR L7 Service Manual Download Page 35

6809495A77-O

         September 23, 2005   

35

Level 1 and 2 Service Manual

Disassembly

3.

Turn the chassis assembly over and lift the top edge of the display module (see 
Figure 21).

4.

Carefully thread the display flex cable through the slot in the chassis assembly 
and lift the display module away from the chassis.

5.

To replace, align the display module to the chassis assembly.

6.

Hold the side of the display module near the flex cable away from the chassis 
assembly.

7.

Carefully thread the display flex connector through the opening on the chassis 
assembly.

8.

Lower the display module fully onto the chassis assembly and gently press it 
into place.

9.

Reassemble the antenna, keypad PC board, keypad, front housing, transceiver 
PC board, transceiver PC board shield, antenna cap, SIM, battery and battery 
cover as described in the procedures.

051045o

Figure 21. Removing the Display Module

Display module

Plastic tweezers

Summary of Contents for HELLOMOTO SLVR L7





















































Reviews:

No comments