manualshive.com logo in svg

Motorola HELLOMOTO SLVR L7, Service Manual, Page: 28 / 52

Share
Download
Motorola HELLOMOTO SLVR L7 Service Manual Download Page 28

28

 

         September 23, 2005  

6809495A77-O

Disassembly

 Motorola SLVR L7

3.

Lift the camera assembly away from the transceiver PC board (see Figure 14).

4.

Remove the rubber grommet from the camera assembly.

5.

To replace, place the rubber camera assembly grommet onto the camera 
assembly. Ensure the flat side of the grommet is facing away from the flex 
connector.

6.

Align the camera assembly to the transceiver PC board.

7.

Slide the camera assembly into its slot on the transceiver PC board.Ensure 
that the flat side of the camera grommet lines up with the outer edge of the PC 
board.

8.

Carefully press the camera flex connector into its socket on the transceiver PC 
board.

9.

Reassemble the transceiver PC board, transceiver PC board shield, antenna 
cap, SIM, battery and battery cover as described in the procedures.

050981o

Figure 14. Removing the Camera Assembly

Camera assembly

Plastic tweezers

Summary of Contents for HELLOMOTO SLVR L7





















































Reviews:

No comments