
18
September 23, 2005
6809495A77-O
Disassembly
Motorola SLVR L7
Disassembly
This section describes how to disassemble a Motorola SLVR L7 telephone. Tools
and equipment used are listed in Table 1.
Removing and Replacing the Battery Cover
1.
Ensure the phone is turned off.
2.
Press the battery cover latch at the top of the phone, and lift the battery cover
up from the phone and lift it off (see Figure 4).
3.
To replace, align the battery cover with the rear housing.
4.
Place the battery cover on the rear housing and gently press the battery cover
until it snaps into place. Ensure that the battery door tap is tucked in below
the RF cover.
G
Many of the integrated devices used in this phone are vulnerable to damage from
ESD. Ensure adequate static protection is in place when handling, shipping, and
servicing any internal components.
G
Avoid stressing the plastic in any way to avoid damage to either the plastic or
internal components.
050964o
Figure 4. Removing the Battery Cover
Battery cover latch
Battery cover
Summary of Contents for HELLOMOTO SLVR L7
Page 2: ......
Page 4: ...4 September 23 2005 6809495A77 O Contents Motorola SLVR L7 ...
Page 51: ......