4
Turning the Radio ON/OFF
English
Key click:
Confidence tone when
any key pressed/speech
limitation warning.
Fail tone:
Hardware error/call
timed out (conventional
mode).
Note:
In the following pages two types of radio display
examples will be shown :
Turning the Radio ON/OFF
Turn the radio on by pressing the combined ON/
OFF/VOLUME control (1). The radio then enters a
self test routine. During the test the display will be
activated, the self test tone will sound, and the LED
will light green. If the radio fails the self test a
continuous low tone will sound and the display will
show a fault code, e.g. “02”:
until the radio is turned off by pressing the control
(1) again.
Note:
If the radio fails the self test routine, consult your
dealer.
When the self test is complete the radio will display:
where "213" is the identity of the radio.
After this text has been displayed, the radio will scan
for system access with the LED flashing GREEN
and the scanning icon
lit.
When a control channel is acquired, the green LED
will go off and the scanning icon
will be replaced
by the registered icon
.
Use the combined ON/OFF/VOLUME control (1) to
adjust the volume to a comfortable listening level.
TEXT 213
TEXT
K8
K4
RADIO FAULT 02
ERR 02
K8
K4
TEXT 213
TEXT
followed by
213
K8
K4
Turning the Radio ON/OFF
GM1200 (EN) Stage4 Page 4 Thursday, May 1, 1997 1:28 pm
