manualshive.com logo in svg

Motorola GM1200 Series, User Manual

Share
Download
Motorola GM1200 Series User Manual Download Page 12

12

Special Calls

English

To scroll on a word basis, press keypad button 

 

to scroll forward through the message and keypad 
button 

 to scroll backwards. The display shows 

as many complete words as the display allows, after 
which they are split and displayed section by 
section.

Press Edit 

 (7) to return to the SDM stack 

interrogate mode to select and display other SDMs.

Deleting Messages from the SDM Stack

Pressing either Clear button 

 (6) or keypad keys 

 will delete the currently selected SDM from 

the stack. The radio returns to the SDM stack 
interrogate mode after each deletion until the last 
message is deleted when the display returns to the 
idle state and the SDM icon 

 is extinguished.

Status replies to an SDM

Where an SDM contains a calling party number, the 
radio can respond with a status message.

From the SDM stack interrogate mode or SDM 
scrolling mode, press the status key 

 (9). The 

radio will exit the data mode and enter the dialling 
state for example:

The status digits can then be specified as in normal 
status mode.

Making an SDM Call

SDM calls may be set up in one of three ways, via 
the data key 

, manually via the keypad or via the 

shortform dialling feature.

To make an SDM call via the data key, select the 
desired address as detailed in Making a Call, press 
the 

 key (14) followed by the data message 

string which may only consist of digits (0-9).
i.e. ADDRESS (

) DATA

To make an SDM call via the keypad, enter 

 followed by the data message string 

(digits 0-9), press 

 followed by the desired 

address as described in Making a Call.
i.e.

 DATA 

 ADDRESS

Note:

The maximum data message size is limited to 20
characters which includes address information
and data selection characters.

To make an SDM call via the shortform dialling 
feature, select the pre-programmed address and 
send the message as detailed in Shortform 
Dialling.

Note:

The maximum data message size is limited to 14
characters which includes address information
and data selection characters.

8

2

C

✱

#

S

        213S

D

D

D

✱

2

✱

✱

✱

2

✱

✱

Special Calls/Short Data Messages

GM1200 (EN) Stage4  Page 12  Thursday, May 1, 1997  1:28 pm

Summary of Contents for GM1200 Series




















Reviews:

No comments

Brands by name

Popular brands

Load more brands