manualshive.com logo in svg

Motorola GM1200 Series, User Manual

Share
Download
Motorola GM1200 Series User Manual Download Page 13

13

Special Calls

English

Receiving a Status Call

A status is a code for transmitting prearranged 
messages. For example, status "05" may indicate 
"Return to base". When the radio receives a status 
call, tone G will sound and the display changes to:

if status text is preprogrammed in the radio.

Making a Status Call

For radios with a keypad, status calls may be 
initiated in two different ways, via the status key 

 (9) or manually via the keypad (8). 

On K4 radios status calls can only be made if they 
are preprogrammed into the radio on the selector 
(16 & 17).

In order to make a status call via the status button, 
choose the desired address as described in Making 
a Call. Then press the status button 

 (9), 

followed by two status digits. The display then 
changes to:

The status number may be edited by using the edit 
key 

 (7), please refer to Keypad Edit.

To initiate a status call via the keypad (8) enter 

 then enter the status e.g. "05" followed by 

 and the desired address.

In both cases the call is handled as described in 
Making a Call.

Making an Emergency Call

Hold the emergency button (5) down for a preset 
period of time to make a call to a preprogrammed 
emergency number. No further button press is 
required to establish the call.

If provided by the system, the user can also dial a 
preprogrammed emergency number via the keypad 
(8). Please contact your dealer for further 
information.

followed by

213

S05

 S05       213
RETURN TO BASE

RETURN

and

S

S

 S05       213
RETURN TO BASE

✱

0

✱

Special Calls/Status/Emergency

GM1200 (EN) Stage4  Page 13  Thursday, May 1, 1997  1:28 pm

Summary of Contents for GM1200 Series




















Reviews:

No comments

Brands by name

Popular brands

Load more brands