Motorola FR6070Enterprise User Manual Download

Page: 36 / 68

Using the FR6076

LED Indicators

The FR6070has three LED indicators. The Scan/Decode LED indicates status for bar code scanning. The
Charging/Battery Status LED indicates battery charging and status. The Radio Status LED indicates WAN radio
status.

Table 2-6

describes the LED indications.

Figure 2-10

LED Indicators

1. Scan/Decode LED

2. Charging LED
3. Radio Status LED

Table 2-6

LED Indications

LED status

Indication

Scan/Decode LED

Solid Green

Successful decode/capture

Solid red

Laser enabled, scanning in process

Off Not

enabled

Charging/Battery Status LED

Slow blinking amber

Main battery in FR6070is charging.

Solid green

Main battery in FR6070is fully charged.

Fast blinking amber

Charging error

Off

Not charging

Single blink amber (when power button is
pressed)

Battery depleted

Blinking amber (when power button is
pressed)

Battery over-temperature condition

Radio Status LED

Slow blink green

The radio (BT,WIFI,GPS,RIL) can work
correctly when it is on

Slow blink red

Some radio (BT,WIFI,GPS,RIL) can not
work correctly when it is on.

Off All

radio

off.

Summary of Contents for FR6070Enterprise





































































Search results

Summary of Contents for FR6070Enterprise

Reviews:

Related manuals for FR6070Enterprise

Brands by name

Popular brands

Motorola FR6070Enterprise, User Manual

Search results

Summary of Contents for FR6070Enterprise

Reviews:

Related manuals for FR6070Enterprise

Brands by name

Popular brands