Getting Started
FR6800 User Guide
20
Removing the Screen Protector
A screen protector is applied to the FR6070. Motorola recommends using this to minimize wear and tear. Screen
protectors enhance the usability and durability of touch screen displays.
To remove the screen protector, lift the corner using a thin plastic card, such as a credit card, then carefully lift it off
the display.
Figure 1-7
Removing the Screen Protector
CAUTION
Do not use a sharp object to remove the protector. Doing so can damage the display.
NOTE
Not using a screen protector can affect warranty coverage. To purchase replacement protectors, contact
your local account manager or Motorola, Inc. These include screen protector installation instructions. Part
number: KT-93765-01R Screen Protector 3/pk.
Replacing the Main Battery
1.
Press the red
Power
button to suspend the FR6070.
2
. Loosen the handstrap.
3.
Open the battery cover latches on either side of the battery cover.
4.
Lift the top of the battery cover and remove.
5.
Press the battery release latch on the bottom of the battery to unlock, and lift the battery out of the well.
6.
Insert the replacement battery, top first, into the battery compartment in the back of the FR6070.
7.
Press the battery down into the battery compartment until the battery release latch snaps into place.
NOTE
Position the battery correctly, with the battery charging contacts on top of the charging contacts in the battery
compartment.
8.
With the battery cover latches open, insert the cover, bottom first, then press down on the top of the cover.
9. Close the battery cover latches on either side of the battery cover.
10.
Insert the handstrap through the handstrap slot, then tighten and press down to secure.
The FR6070powers up after the battery is inserted and the battery cover is replaced.
