22
Scanning Barcodes
The HC700-G houses a digital camera (imager) that scans the
most commonly used 1D and 2D barcodes (depend on your
imager options).
The HC700-G and the HCe700-G are manufactured with the
following imager engine options:
•
5100 series with Light Emitting Diodes (LED) aiming
technology
•
5300 series with Laser aiming technology
Scanning with LED aimer imager
To scan barcode/capture image, perform the following:
1.
Run the Bcr barcode reader application:
> Programs > Sample Applications > Bcr
.
2.
Aim and hold the HC700-G at about 7 inches from the
target.
3.
Press one of the Scan/Picture keys and adjust your posi-
tion to place the emitted green bar at the target. The red
light, emitted form the imager, serves as an ambient illu-
mination.
Note:
When adjusting your position, you may rotate the
wrist left or wright and pitch by dropping or lifting the
wrist. Move back or forth from the target to capture the
entire object. A successful scan is followed by a beeping
sound.
Summary of Contents for F4705A
