manualshive.com logo in svg

Motorola DSR4410, Operator'S Manual, Page: 30 / 76

Share
Download
Motorola DSR4410 Operator'S Manual Download Page 30

3

24 

Press a directional (

3456

) button to back out of the field and leave it unchanged. 

Otherwise, press the Enter button to proceed.  The following message will appear.

Power Cycle Option

The Power Cycle option will reboot the unit without losing internal user setup information 
or downloaded network information. Press the Enter button and a warning message 
appears saying that the current service will be interrupted if the action proceeds.

Press a directional (

3456

) button to back out of the field and leave it unchanged. 

Otherwise, press the Enter button to proceed.  The following message will appear

.

MAC Address Menu

Press the 

56

 buttons until the MAC Address menu appears. This menu displays the 

MAC address of the Ethernet port.  The address is represented in a hexadecimal format. It 
is non-editable.

IP Address Menu

Press the 

56

 buttons until the IP Address menu appears. This menu allows the user to 

enter an IP address for the Ethernet port.  The address is represented in the common dotted-
decimal format.  Contact the network administrator for details about configuring the 
Ethernet port for operation on your local network.

Press E to continue or    to stop

Factory Default reset in progress. . .

Press E to continue or    to stop

CAUTION: Reset will interrupt service

Press E to continue or    to stop

Power Cycle reset in progress. . .

   E               hh-hh-hh-hh-hh-hh

J

MAC ADDRESS

   E               ddd.ddd.ddd.ddd

J

IP ADDRESS       

J

Address

Summary of Contents for DSR4410













































































Reviews:

No comments