Front Panel Step 2: Program the DSR-6100.
If not there already, move the cursor to the upper left hand corner of any menu and
press
ENTER
to revert to the main “
DSR-6100
” menu:
Use the
▲▼
arrow buttons, if necessary, to access the
MANUAL TUNE
menu.
move the cursor to
“Xpndr”
and press
ENTER
. Press the
▲
arrow five (5) times to change
Xpndr “09” to
“14”
and press
ENTER
. Confirm the green
SIGNAL
LED stays on.
4
»
Port
3
/Xpndr
9
»
Port
4
/Xpndr
14
Use
◄
►
buttons to move
the cursor to “
Install
” and
press
ENTER
.
Use
◄
►
buttons to move the cursor to
“Input”
and press
ENTER
.
Press the
▲
arrow twice to change the value to
“Port 3”
and press
ENTER
.
Use
◄
►
buttons to move the cursor to
“Xpndr”
and press
ENTER
.
Press the
▲
arrow eight (8) times to change the value to
“09”
and press
ENTER
.
Use
◄
►
buttons to move the cursor to the left of “
MANUAL TUNE
”.
Press the
▼
arrow button once to access the “
MODULATION
” menu.
Press the
▼
arrow button once to change DCII-AUTO to “
DVB S2
” mode and press
ENTER
. Use
◄
►
buttons to move the cursor to “
Symbol
” and press
ENTER
.
If the default DVBS2 Symbol rate value is 01.000000 Msps, use the
◄
►
▲▼
buttons
to change the “
Symbol
” rate value to
30
.000000 Msps and press
ENTER
.
Confirm the green
SIGNAL
LED comes on. Use
◄
►
buttons to move the cursor to
the left of “
MODULATION
” and press the
▲
arrow one (1) time to “
MANUAL TUNE
”.
Use
◄
►
buttons to move
the cursor to the left of
“
Mode
” and press
ENTER
.
Use
◄
►
buttons to move the cursor to
“Input”
and
press
ENTER.
Press the
▲
arrow once to change the
value to
“Port 4”
and press
ENTER
. Use
◄
►
buttons to
4
14
1170.00
