DSR-6100 Front Panel Programming
Connect to AC power. The unit takes about 90 seconds to boot up.
During the boot up process, this Model/Version
screen will appear for a few seconds and will be
replaced by the Main/DSR-6100 menu screen:
Front Panel Step 1:
Display and Record the U/A Number.
Starting on this main “
DSR-6100
” menu, use the
◄
►
arrow buttons to navigate to
“
Diag
” and press
ENTER
.
Once this “DIAGNOSTIC
→
Menus” screen appears, press the
▼
arrow button once, to access the
Unit Address
.
DSR-6100 Required RF Connections
3
Connect both RF Input Signals:
—
> Port 3: Galaxy 14 C-Band Horizontal LNB RF
—
> Port 4: Galaxy 14 C-Band Vertical LNB RF
PLEASE NOTE
: Programming for these ESPN services can come from either port at any given time.
Installers must connect and test both RF input ports 3 and 4 for signal lock. (Front Panel Step 2)
Record the Unit Address number for each receiver:
ESPN 000 - _________ - _________ -
ESPN2 000 - _________ - _________ -
ESPNEWS 000 - _________ - _________ -
ESPNU 000 - _________ - _________ -
