Motorola DSR-4530, Operator'S Manual, Page: 49 / 92

DSR-4530 43
Operating the DSR-4530
IP Menus
Use the IP menus is to configure the 10/100 port. To access the IP menus, press
ENTER button to return to the main top-level menu (shown below).
Press the
34
buttons until the cursor is at the IP label, and press the ENTER button.
The DSR-4530 displays the first sub-menu within the IP menus.
MAC Address Menu
To view the MAC address for the lower Ethernet port on the back panel of the
DSR-4530. Press the
56
buttons until the MAC Address menu appears (shown
below). The address is represented in a hexadecimal format and non-editable.
IP Address Menu
Use the following procedure to set and view the IP address (range:
000.000.000.000 to 255.255.255.255) for the lower Ethernet port on the back panel
of the DSR-4530. The address is represented in the common dotted-decimal
format. Contact the network administrator for details about configuring the
Ethernet port for operation on your local network.
Press the
56
buttons until the IP Address menu appears (shown below).
To change the IP address, press the
4
button until the cursor is at the Address label,
and press the ENTER button to move into the field. Use the
34
buttons to select
the digit to change and then, while the cursor is on that digit, press the
56
buttons
to display the desired value. Repeat this process for each applicable digit to be
changed.
E Install Channel IP Status Diag
DSR-4530
Read-only
E hh-hh-hh-hh-hh-hh
PORT 10/100 MAC Address
E 192.168.000.100
PORT 10/100 IP Address