Motorola DS4208 Product Reference Manual Download Page 152

Page: 152 / 364

8 - 2

DS4208 Digital Scanner Product Reference Guide

Connecting a Keyboard Wedge Interface

Figure 8-1

Keyboard Wedge Connection with Y-cable

To connect the Keyboard Wedge interface Y-cable:

Turn off the host and unplug the keyboard connector.

Attach the modular connector of the Y-cable to the cable interface port on the digital scanner. See

Installing the

Interface Cable on page 1-3.

Connect the round male DIN host connector of the Y-cable to the keyboard port on the host device.

Connect the round female DIN keyboard connector of the Y-cable to the keyboard connector.

If needed, attach the optional power supply to the connector in the middle of the Y-cable.

Ensure that all connections are secure.

Turn on the host system.

Select the Keyboard Wedge host type by scanning the appropriate bar code from

Keyboard Wedge Host

Types on page 8-4

To modify any other parameter options, scan the appropriate bar codes in this chapter.

Male DIN

connector

Female DIN

connector

Keyboard

connector

NOTE

Interface cables vary depending on configuration. The connectors illustrated in

Figure 8-1

are examples

only. The connectors may be different than those illustrated, but the steps to connect the digital scanner
are the same.

Summary of Contents for DS4208













































































































































































































































































































































































Search results

Summary of Contents for DS4208

Reviews:

Related manuals for DS4208

Brands by name

Popular brands

Motorola DS4208, Product Reference Manual

Search results

Summary of Contents for DS4208

Reviews:

Related manuals for DS4208

Brands by name

Popular brands