Motorola DCH3000, Installation Manual, Page: 36 / 72

4 DIAGNOSTICS
26
Figure 4-4 Front panel display for the OOB diagnostic
The Out-Of-Band Status fields are:
Field Description
OOB
Frequency
Indicates the OOB tuner center frequency, from 70 to 130 MHz.
Carrier Lock Indicates whether the OOB receiver is locked to the carrier:
OSD Front panel Description
YES L Carrier locked
NO U Carrier unlocked
Data Indicates whether data is being carried by the OOB and EMM traffic, which is tracked
separately:
OSD Front panel Description
YES On OOB data detected within last 5 seconds
NO Off OOB data not detected within last 5 seconds
EMM Data Indicates whether EMM data is being carried on the OOB stream:
OSD Front panel Description
YES On EMM data detected within last 5 seconds
NO Off EMM data not detected within last 5 seconds
SNR
When carrier lock has been established, displays an estimate of the carrier signal-to-noise
ratio in dB, with an explanation:
GOOD — Good value
FAIR — Marginal signal level, check the signal
POOR — Unusable signal
INVALID — Invalid SNR value
AGC
When carrier lock has been established, displays an estimate of the AGC as a percentage,
with an explanation:
GOOD — Good value
FAIR — Marginal signal level, check the signal
POOR — Unusable signal
INVALID — Invalid AGC value
EMM
Provider ID
Displays the conditional access stream for the DCH3200, in hexadecimal
Data activity
indicator
EMM data
activity indicator
OOB
diagnostic
indicator
Carrier lock indicator
(L = locked, U = unlocked