background image

20

General information

EN

LIMITED WARRANTY, OTHERWISE THE REPAIR OR 
REPLACEMENT PROVIDED UNDER THIS EXPRESS 
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE 
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER 
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT 
SHALL MOTOROLA OR SUNCORP TECHNOLOGIES LTD 
BE LIABLE, WHETHER IN CONTRACT OR TORT 
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF 
THE PURCHASE PRICE OF THE PRODUCT OR 
ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, 
SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, 
OR LOSS OF REVENUE OR PROFITS, LOSS OF BUSINESS, 
LOSS OF INFORMATION OR OTHER FINANCIAL LOSS 
ARISING OUT OF OR IN CONNECTION WITH THE ABILITY 
OR INABILITY TO USE THE PRODUCTS OR ACCESSORIES 
TO THE FULL EXTENT THESE DAMAGES MAY BE 
DISCLAIMED BY LAW.
Some jurisdictions do not allow the limitation or exclusion of 
incidental or consequential damages, or limitation on the length 
of an implied warranty, so the above limitations or exclusions 
may not apply to you. This warranty gives you specific legal 
rights, and you may also have other rights that vary from one 
jurisdiction to another.

Exclusions

Normal Wear and Tear.

 Periodic maintenance, repair and 

replacement of parts due to normal wear and tear are excluded 
from coverage. 

Batteries.

 Only batteries whose fully charged capacity falls 

below 80% of their rated capacity and batteries that leak are 
covered by this limited warranty.

Abuse & Misuse.

 Defects or damage that result from: (a) 

improper operation, storage, misuse or abuse, accident or 
neglect, such as physical damage (cracks, scratches, etc.) to 
the surface of the product resulting from misuse; (b) contact 
with liquid, water, rain, extreme humidity or heavy perspiration, 
sand, dirt or the like, extreme heat, or food; (c) use of the 
Products or Accessories for commercial purposes or subjecting 
the Product or Accessory to abnormal usage or conditions; or 
(d) other acts which are not the fault of Motorola or SUNCORP 
TECHNOLOGIES LTD., are excluded from coverage. 

Use of Non-Motorola branded Products and Accessories.

 

Defects or damage that result from the use of Non-Motorola 
branded or certified Products or Accessories or other peripheral 
equipment are excluded from coverage. 

Unauthorized Service or Modification.

 Defects or damages 

resulting from service, testing, adjustment, installation, 
maintenance, alteration, or modification in any way by 
someone other than Motorola, SUNCORP TECHNOLOGIES 
LTD. or its authorized service centers, are excluded from 
coverage. 

Altered Products.

 Products or Accessories with (a) serial 

numbers or date tags that have been removed, altered or 
obliterated; (b) broken seals or that show evidence of 
tampering; (c) mismatched board serial numbers; or (d) 
nonconforming or non-Motorola branded housings, or parts, 
are excluded from coverage. 

Communication Services.

 Defects, damages, or the failure of 

Products or Accessories due to any communication service or 
signal you may subscribe to or use with the Products or 
Accessories is excluded from coverage. 

How to Obtain Warranty Service or Other 

Information?

To obtain service or information, please call: 

60-3-78752888

.

Website:

 www.riger.com.my 

You will receive instructions on how to ship the Products or 
Accessories at your expense, to SUNCORP TECHNOLOGIES 
LTD. It is the responsibility of the purchaser to contact the 
nearest authorised service center/distributor and bring the 
product at the purchaser's risk to that authorised service center. 

Authorized Repair Center 

To obtain service, you must include: (a) the Product or 
Accessory; (b) the original proof of purchase (receipt) which 
includes the date, place and seller of the Product; (c) if a 

warranty card was included in your box, a completed warranty 
card showing the serial number of the Product; (d) a written 
description of the problem; and, most importantly; (e) your 
address and telephone number.

Technical Information

How many telephones can I have?

All items of telephone equipment have a Ringer Equivalence 
Number (REN), which is used to calculate the number of items 
which may be connected to any one telephone line. Your D11P 
has a REN of 1. A total REN of 4 is allowed. If the total REN of 
4 is exceeded, the telephones may not ring. With different 
telephone types there is no guarantee of ringing, even when the 
REN is less than 4.
Any additional handsets and chargers that you register have a 
REN of 0.

R&TTE

This product is intended for use within Europe for connection to 
the public telephone network and compatible switchboards.
This equipment complies with the essential requirements for 
the Radio Equipment and Telecommunications Terminal 
Equipment Directive 1999/5/EC. including compliance with 
ICNIRP standard for electromagnetic energy exposure. 

Connecting to a switchboard

This product is intended for use within Europe for connection to 
the public telephone network.

Inserting a pause

With some switchboards, after dialling the access code you 
may have to wait for a moment while the switchboard picks up 
an outside line so you will need to enter a pause in the dialing 
sequence.
Press and hold 

u

 to insert a pause (P) before entering the 

telephone number.
You may also need to enter a pause when storing international 
numbers or charge card numbers.

Recall

You may need to use the recall function if you are connected to 
a switchboard/PABX (Private Automatic Branch Exchange), 
contact your PABX supplier for further information.

Products Covered

Length of Coverage

Consumer Products 

One (1) year

 from the date of the 

products original purchase by the 
first consumer purchaser of the 
product.

Consumer Accessories 
(battery, power supply(s) 
and line cords) 

Ninety (90) days

 from the date of 

the accessories original purchase 
by the first consumer purchaser of 
the product.

Consumer Products and 
Accessories that are 
Repaired or Replaced

The balance of the original 
warranty or for ninety (90) days

 

from the date returned to the 
consumer, whichever is longer.

Summary of Contents for D1101P
























Reviews: