Motorola CP110, User Manual

Page: 36 / 146

GET
T
ING S
T
ART
ED
English
34
Note:
• The iVOX feature is available only on display
models.
• To learn how to set VOX/iVOX sensitivity
levels refer to ‘Menu Options’ in this section.
• There is a short delay between when you start
talking and when the radio transmits.To learn
how to set VOX/iVOX sensitivity levels, refer
to “MENU Options” on page 35
Battery Save
Battery Save feature extends battery life as
your radio goes into ‘Idle’ state each time there
is no radio activity. To enable/disable, press
SB1 and SB2 buttons simultaneously for 2 or
3 seconds while powering up the radio until you
hear a quick series of beeps. To have a slightly
better attack time, set Battery Save feature to
OFF so that the radio is always ready to
transmit or receive without any delays.
Note: Battery Save feature default is ‘ON’.
Reset to Factory Defaults
Reset to Factory Defaults will set back all radio
features to the original factory default settings.
To do so press PTT, SB2 and SB1
simultaneously while turning ON the radio until
you hear a high tone chirp.
End of Transmission Tone (Roger Beep
Tone)
Short press the SB1 button while turning ON
the radio to enable/disable.
Note: Default is ‘OFF’.
Keypad Beeps
Keypad Beeps can be enabled/disabled by
short pressing SB2 button (until radio ‘chirps’)
while turning ON the radio.
Keypad Lock/Unlock
You can lock the keypad to avoid accidentally
changing your radio settings. Press and hold
MENU for 4 seconds to lock the radio keypad.
To unlock, press MENU for 4 seconds.