1-1
1
1
Introduction
CPX2000 Series System Product Description
CPX2000 Series systems consist of the:
❏
CPX2108
❏
CPX2208
❏
CPX2208T
❏
CPX2208TDC
❏
CPX2208DC
❏
CPX2408AC
❏
CPX2408DC
❏
CPX2408TAC
❏
CPX2408TDC
The CPX2108 chassis is 19 inch rack, wall or benchtop mounted. The
CPX2208 and CPX2408 chassis are 19 inch or 23 inch rack, wall or
benchtop mounted. The 6U backplane has 8 vertical slots which can
accommodate a CPU module up to four slots (16HP) wide; and seven I/O
slots, (4HP) wide. You can access these eight slots through the front-panel.
The CPX2108 chassis does not support IEEE 1101.11 rear transition
modules. The CPX2208 and CPX2408 do support rear transition modules.
Three peripheral bays (5.25 inch x 1.63 inch) on the CPX2208 give you
front access to floppy, CD-ROM and/or hard disk drives. The CPX2408
gives you five peripheral bays with up to three hard disk drives.
CPX2108 can provide integrated SCSI peripherals (i.e. hard disk drive,
CD-ROM or an 80MB Flash Drive on board the CPV5000 Single-Board
Computer). CPX2208T and CPX2408T provide an integrated H.110 bus
between the J4 connectors of the seven peripheral (non-system) slots. The
H.110 bus gives you the medium for communications between fax, text-
to-speech, speech recognition and other telecommunications interfaces.
This system uses a back plane and system architecture that supports high
density, hot swap and eurocard packaging.
Summary of Contents for CompactPCI CPX2000 Series
