Removing and Installing the 3.5 Inch Floppy Drive, CD-ROM Drive or Hard Disk Drive
http://www.motorola.com/computer/literature
3-33
3
7. Slide the floppy drive, CD-ROM drive or hard disk drive out the
front of the chassis.
For the floppy drive and hard disk drive, use the following steps 8 through
12.
8. Remove the four screws (4-40) holding the two drive rails (one on
each side) to the sides of the drive carrier.
9. Remove the drive rails from the sides of the carrier.
10. Remove the four or six screws holding the drive in the carrier.
11. Remove the drive from the carrier
12. Reverse this procedure to install a drive back into the chassis.
For the CD-ROM drive, use the following steps 13 through 15:
2157 9804 (i)
Floppy Drive
Drive Rails
Drive Rail
Guides
Summary of Contents for CompactPCI CPX2000 Series
