Motorola CM360 User Manual Download

Page: 47 / 56

English

UTILITIES

LONE WORKER

The Lone Worker feature enables you to work alone
with added safety. You can switch the feature

Off

by using a pre-programmed

Lone Worker

button, or via the menu.

Using the Lone Worker Button

Press the

Lone Worker

button to switch Lone

Worker

, when the feature enable alert will

sound and the display will show:

•

If you have not pressed any buttons within a
programmed time, you will be reminded that

Lone Worker

is switched

by a high pitched

alert tone (Lone Worker Reminder) being
sounded.

•

Press

any button

to respond and cancel the

alert, if you do

not

the radio will enter the

Emergency state.

Press the

Lone Worker

button again to switch

Lone Worker

off

, when the feature disable alert

will sound and the display will show:

You may also switch off Lone Worker by chang-

ing the channel or switching radio

off

and

again.

Using the Menu

LWKR ON

LWKR OFF

Ensure radio is in IDLE STATE.

Short press on

to enter menu

until

Short press on

to select

until:

Short press on

to show

current

status.

oggles on/off

Long press on

to select

Display shows:
(for 2 seconds)

Radio exits menu
mode and display
shows e.g.:

UTILS

LONE WKR

OFF

SELECTED

CHAN 05

Summary of Contents for CM360

























































Search results

Summary of Contents for CM360

Reviews:

Related manuals for CM360

Brands by name

Popular brands

Motorola CM360, User Manual

Search results

Summary of Contents for CM360

Reviews:

Related manuals for CM360

Brands by name

Popular brands