20
English
UTILITI
E
S
LONE WORKER
The Lone Worker feature enables you to work alone
with added safety. You can switch the feature
On
or
Off
by using a pre-programmed
Lone Worker
button.
Switching Lone Worker On
1.
Press the
Lone Worker
button to switch Lone
Worker
on
, when the feature enable alert will
sound.
2.
If you have not pressed any buttons within a
programmed time, you will be reminded that
Lone Worker
is switched
on
by a high pitched
alert tone (Lone Worker Reminder) being
sounded.
3.
Press
any button
to respond and cancel the
alert, if you do
not
the radio will enter the
Emergency state.
Switching Lone Worker Off
1.
Press the
Lone Worker
button again to switch
Lone Worker
off
, when the feature disable alert
will sound.
2.
You may also switch off Lone Worker by chang-
ing the channel or switching radio
off
and
on
again.
POWER LEVEL
You can transmit your calls at different transmit
power levels. A higher level means you can reach a
radio that is farther away. A lower power level
reduces the possibility of interference. Use the high
power setting only when necessary.
You can switch between
high
and
low
power levels
by using a pre-programmed
Power Level
button.
Using the Power Level Button
1.
Press the
Power
Level
button to switch to
high
power
when the feature enable alert will
sound and the display will show a dot in the
bottom right hand corner.
2.
Press the
Power
Level
button again to switch
to
low power
when the feature disable alert will
sound and the
“High Power “ dot on the display will go out.
