25
ADV
ANC
ED
RA
DIO
CONFIGURA
TION (*)
English
ADVANCED RADIO
CONFIGURATION (*)
(*) Enhancement feature on CLP radios. May not
be available on previous shipping radios.
Advanced Radio Configuration provides you with
the ability to configure the following settings from
a pre-programmed list without the need to use
a computer.
•
Channels
•
Frequencies
•
Codes (CTCSS/DPL)
Frequencies allows the user to select frequencies
for each channel. Codes helps minimise
interference by providing the user with a choice of
code combinations that filter out static, noise and
unwanted messages.
Entering Advanced Radio Configuration
Mode
Before starting, make sure the device is powered
OFF.
Note:
For
Bluetooth
models, make sure the wired
accessory is connected or the
Bluetooth
headset is paired before entering Advanced
Radio Configuration Mode.
1.
Press the
PTT
, “+” button and Power button
at the same time and hold for 3 to 5 seconds
until you hear a “chirp” sound and the voice
prompt “Programming Mode”.
Note:
The LED Indicator should start blinking
a green heartbeat
.
2.
Press the
Menu
button to select the settings
you want to change:
•
Channel (for multi-channel models)
•
Frequency
•
Code
3.
The voice announcements indicate the menu
items and their current settings. To change,
press “+/-” buttons; to go to the next menu
item, press
Menu
button.
4.
To exit the Advanced Radio Configuration
Mode, press and hold the
PTT
button until
you hear a “beep” sound.
5.
Resume normal radio operation.
68012001063_CLP_en.book Page 25 Wednesday, July 19, 2017 4:44 PM
