35
Using your Answering Machine
9.5.4 Select the announcement
Press
M
, scroll
d
to
Answ. Machine
and press
M
.
Scroll
d
to
Voice answer
and press
M
.
Press
i
or
d
to select either
Answer only
or
Record also
and press
M
to confirm.
Note
If the answering machine is turned off and then turned on via the base unit the
settings will be the same as when it was last switched on.
9.6
Ring delay
Select the duration of rings before your answer machine picks up the call.
Choose from 3-8 Rings or Toll Saver.
• When set to Toll Saver, if you have new messages your phone answers after
3 Rings.
• If there are no new messages it will answer after 5 Rings. So you have the
option to hang up, saving the time and cost of a call.
• If the memory is full, it will automatically revert to Answer Only mode.
1. Press
M
, scroll
d
to
Answ. Machine
and press
M
.
2. Scroll
d
to
Ring delay
and press
M
. The handset will display the current
setting.
3. Use
i
or
d
to select the number of rings required and press
M
to confirm.
9.7
Remote access
You can operate your answering machine from any DTMF phone by calling
your product and entering a 4 digit security PIN code.
1. Dial your telephone number. When you hear your outgoing message, press
#.
2. Enter your 4-digit PIN (default setting 0000) you will hear a confirmation
beep. Use the keypad to operate the answering machine.
Press 1 for previous the message
Press 7 to turn On the answering
machine
Press 2 to play messages
Press 8 to stop message playback
Press 3 to play the next message
Press 9 to turn Off the answering
machine
Press 6 to delete the current message
