28
Advanced settings
7.2.3 Set a call block number
1. Press
M
, scroll
d
to
Advanced Set
and press
M
.
2. Scroll
d
to
Call block
, press
M
.
3. Enter the master PIN (default setting 0000) and press
M
.
4. Scroll
d
to
Blacklist
and press
M
.
5. Scroll
d
to
Block number
and press
M
.
6. If necessary, scroll
i
or
d
to the next available slot.
7. Press
M
and enter the number you want to block. Press
M
to confirm.
Note
When you are storing an phone number in the Blacklist, you will need to store
the full number including the dialling code for the number to be blocked.
If you want to change/delete the blacklist number follow the first 5 steps in
7.2.3 above, and then scroll to the slot where the number is stored and press
M
. Delete the number by pressing
u
and either press
M
to save no number
or enter the new number and press
M
to save.
7.2.4 Change the Call block PIN
1. Press
M
, scroll
d
to
Advanced Set
and press
M
.
2. Scroll
d
to
Call block
, press
M
.
3. Enter the master PIN (default setting 0000) and press
M
.
4. Scroll
d
to
Change PIN
. Press
M
.
5. Enter the old PIN and press
M
.
6. Using the keypad enter the new PIN and press
M
.
7. Re-type the new PIN and press
M
.
7.3
Area code
The area code must be 3 digits long.
1. Press
M
, scroll
d
to
Advanced Set
and press
M
.
2. Scroll
d
to
Area code
is displayed. Press
M
.
3. Using the keypad enter the area code and press
M
to confirm.
7.4
Auto prefix
You can set the phone to detect a dialling number and replace it with another
number. The number to be detected can be up to 5 digits long. It can be
replaced with a number up to 10 digits.
1. Press
M
, scroll
d
to
Advanced Set
and press
M
.
2. Scroll
d
to
Auto prefix
, press
M
.
3.
Detect digit
is displayed. Press
M
.
4. Enter the number you want to be detected and press
M
.
5. The display shows
Prefix
, press
M
.
