UCA Server 6 - 49
Phone.Gateway.Port
Port for the phone gateway used for PBX communications.
Phone.Gateway.Protocol.Type
The protocol and type of gateway with which the phone client
attempts to communicate.
Phone.Gateway.SCCP.DeviceType
Device Type - set to 7960.
Phone.Peer2Peer.Enable
Enable direct CA50-to-CA50 IP based calls for CA50 devices.
Device phone calls do not utilize a PBX if this is enabled.
Phone.Peer2Peer.Port
The port on which to make direct CA50-to-CA50 IP based calls.
Phonebook.Ranges.BaseRangeCount
The starting number of ranges to attempt to break a list into.
Phonebook.Ranges.MaxNonRangeSize
Maximum number of extensions to display as a single menu before
breaking into ranges (multiple menus).
Phonebook.Ranges.MaxRangeSize
The maximum number of extensions to put in a range.
Phonebook.RecentCalls.Interval
Age in hours of past calls to consider as a recent call.
Phonebook.SelectableGroups.ShowAll
Determines whether or not the user associated with multiple
groups appears in each department.
System.AllowDynamicWhenStaticFails
Determines whether or not to allow for a dynamic ext if the static
fails to register.
System.DefaultLocation
Default external location ID to use on this server. In many cases
this would be a store number.
System.Device.ActivityThreshold
The length of idle time (hours) before a device is considered in an
unknown state.
System.Language.LanguageID
Language ID of the localized UCA Client (read only).
System.Logging.Level
Diagnostic trace logging.
This setting controls how much detail is written to the trace log
table (T_DebugTrace). All log entries of the specified level and
greater are logged.
Any log entries with lower priority levels are not logged.
Possible Values:
0 - Debug
1 - Flow
2 - Status
3 - Warning
4 - Error
Logging levels of 0 and 1 result in large amounts of logging data
saved in the database. These levels are not recommended for
normal system operation. They should be used with caution and
only in cases where an issue was reported and is being monitored
and investigated by Motorola.
Table 6-2
System Settings (Continued)
Setting
Description
1
The Motorola UCA Maintenance Service must be restarted for changes to the System.Maintenance.DB.* and
System.Maintenance.Session.* variables to take effect.
Summary of Contents for CA50
