26
Base settings
6.4 Dial
mode
Your C12 is set to tone dialling. You should only need to change this if
connected to an older type of switchboard / PBX which requires
pulse dialling.
1. Press
, scroll
to
SETUP
and press
.
2. Scroll
to
DIAL MODE
and press
.
3. Press
or
to select
TONE DIAL
or
PULSE DIAL
and press
to confirm.
6.5 Recall
mode
Depending on your country and network operator, your C12 has the recall
time set as 600 ms (TIMED BR,2). It is unlikely that you need to change this
setting unless advised to do so.
1. Press
, scroll
to
SETUP
and press
.
2. Scroll
to
RECALL
and press
.
3. Press
or
to select
TIMED BR,1
(short flash time) or
TIMED BR,2
(long flash
time) and press
to confirm.
6.6 Restore default settings
You can restore your C12 to its default (original) settings.
All the handsets that are registered to the base will be retained.
IMPORTANT
Resetting your phone to its default settings will delete all entries in the
Phonebook and Calls list. All handset and base settings will also be reset.
1. Press
, scroll
to
SETUP
and press
.
2. Scroll
to
DEFAULT
and press
.
3. Enter the 4 digit PIN code (default = 0000) and press
. The display
shows
CONFIRM ?
.
4. Press
to confirm or
to return to the previous menu. Your C12
will restart automatically.
6.7 Emergency
default
If you have lost your PIN code, you can still restore your C12 to its
default settings.
1. Remove the batteries from the handset.
2. Press and hold
while replacing the batteries. The display
shows
DEFAULT.
3. Press
to confirm. Your C12 will restart automatically.
Summary of Contents for C1001
Page 42: ......
