19
Receiver back panel image
Important note:
Do not interchange the power adapters for your Fibe HD PVR
with any other Fibe HD receivers. Since they have different electrical power
requirements, interchanging them poses a safety hazard.
key
Item
Description
1
To Wall (VIDEo IN)
Coaxial input for digital signal from the Fibe modem to the Fibe HD PVR or HD receiver.
2
HDMI
Provides the best quality digital video signal to a HDTV and also provides up to 5.1
digital audio to capable devices through one cable.
3
NETWoRk
Ethernet 10/100Base-T RJ-45 port for IP video output.
4
Y Pb Pr
Component video output provides HD signals up to 720p or 1080i for a HDTV
(for audio you must connect either optical output audio out R and l).
5
S-VIDEo
Provides high quality standard definition video output (for audio you must connect
either optical output audio out R and l).
6
oPTICal
Provides the best digital audio output for up to 5.1 surround to a home theatre
receiver (also known as a Toslink or S/PDIF connection).
7
VIDEo ouT
Provides a very good standard-definition RCa video output to a TV, VCR, or other
device (for audio you must connect either optical output audio out R and l).
8
auDIo ouT R and l
Provides stereo audio output.
9
To TV
(VIDEo ouT)
Coaxial standard definition output to connect video and audio to the TV or VCR.
10
uSB
uSB 2.0 connector.
11
PoWER +12V DC
Connector for the DC power adapter.
1
2
3
4
5
6
7
8
9
10 11
BBLP10-013 Fibe TV Ref_guide_E.indd 19
10-04-26 13:46
Summary of Contents for Bell VIP1200
Page 1: ...1 Fibe TV Reference Guide ...
Page 2: ...2 ...