Note:
The ARP/Ping Method will not work if the
Disable setting static IP address through ARP/Ping
method
check box is selected in the camera's web browser interface. For more information, see
the
Avigilon High Definition H4 and H5 IP Camera Web Interface User Guide
.
1. Locate and make note of the MAC Address (MAC) listed on the Serial Number Tag for reference.
2. Open a Command Prompt window and enter the following commands:
a.
arp -s
<New Camera IP Address> <Camera MAC Address>
For example:
arp -s 192.168.1.10 00-18-85-12-45-78
b.
ping -l 123 -t
<New Camera IP Address>
For example:
ping -l 123 -t 192.168.1.10
3. Reboot the camera.
4. Close the Command Prompt window when you see the following message:
Reply from
<New Camera IP Address>
: ...
For More Information
Additional information about setting up and using the device is available in the following guides:
l
Avigilon Control Center Client User Guide
l
Web Interface User Guide — Avigilon High Definition H4 and H5 IP Cameras
l
Avigilon USB Wi-Fi Adapter System User Guide
l
Avigilon Camera Configuration Tool User Guide
l
Designing a Site with Avigilon Video Analytics
These guides are available on
and on the Avigilon website:
For More Information
43
